top of page
3dB logo
header_3db.jpg

NOISE REDUCTION FEET PADS

 
Anti-vibration noise reduction feet pads for 3D printers. Helps isolate vibration caused by printer axis movement and motors.
3db_office1.jpg

3dB
FEATURES

  • Dampens printer vibration

  • Reduces noise levels

  • Retains printer output quality

  • Can improve some print issues

  • Economical solution

  • Easy to use

  • For 3D printers up to 80kg net

  • Supplied as a set of 4 pieces

NOISY PRINTERS?

 

3D printers can create excess noise that can be very annoying or worse, highly distracting.

Most printer noise is due to vibration generated by moving parts and motors. This vibration can transfer into any object that the printer is in contact with, such as a desk, workstation or racking. This object then acts like an amplifier for unwanted disruptive noise.

THE SOLUTION IS 3dB

 

3dB are small anti-vibration noise reduction feet pads that help to isolate the vibration caused by the 3D printers movements and motors.

The low profile gives good stability, hence 3dB does not allow excessive shaking even when printing at higher speeds. Print quality is retained and some print issues can even be improved, such as helping to reduce ghosting/ringing.

3dB FOR 3D PRINT FARMS

3dB is particularly effective for print farms with multiple 3D printers when noise levels can reach uncomfortable levels. In these situations 3dB can be truly beneficial to the working environment.

3db_bg2.jpg
3db_bg3.jpg

3dB pads work so well, I'm gobsmacked. I've tried many, many things to reduce the travel sound of my Prusa MK2S, and these four little pads have really dampened the noise. Well done!

Timothy Reese

I've had a printer running for 2 hours and with 3dB couldn't even hear it running from my office. Usually I can hear the Z end-stop ping at the start of a print but I couldn't even hear that.

Oliver W.

I've added 3dB to nearly all of my printers. They are very effective on just one printer but over the whole print farm the noise reduction is amazing! Thank you!

 

Joel T.

bottom of page