Click the button on the right to find your local stockist or distributor.
If you are interested in stocking Modifi3D PRO please email modifi3dpro@steelmans3d.com.
In 2015 we launched the original low cost MODIFI3D. Since then, we have experienced great success, and it is still popular today.
Even though 3D printers are constantly improving they don't always produce perfect parts straight off the bed and all kinds of printing errors can occur. So in response to our customers feedback and suggestions we have developed the Modifi3D PRO version to satisfy their advanced requirements with additional functions.
Modifi3D PRO is an evolution of the 3D print tool. It is now tougher and has more power. We have added adjustable temperature control with an LCD display. Temperature can now be set up to 450ºC to allow for future potential of new tips and attachments.
The PRO is designed to replace much of the sanding, scraping and snapping to finish off your 3D prints, and comes with 10 interchangeable tips. The new improved tips are stronger than before and provide more functions including the ability to produce countersinks and setting threaded inserts.
See the... 10 Interchangeable Tips.
Power: 30W
Input: 24V DC
LCD Display (Adjustable Temperature Control)
Temperature Range: 150-450ºC (302-842ºF)
Handle Size: 29 x 17 x 100mm (1.1 x 0.6 x 3.9") excluding tips
Handle Weight: 30g (1oz) approx.
DC Power Supply (US, EU, UK, AU)
Cable: 1.5m (59") long to 3.5 x 1.35mm DC plug
Modifi3D PRO is easy to use and takes away the frustration of finishing 3D prints. Simply plug in and it can be ready to use in 20-25 seconds.
The PRO also has options for standby and sleep modes if not being used (a basic stand is included but you can print your own PRO stand/tool holder with our downloadable 3D file).
Below are basic instructions (note that these are subject to change and full detailed instructions will be provided in the Modifi3D PRO box.
1. Select a tip and thread into the heater cover tube. Leave the heater cover tube and locking nut in place (this is only for rotational adjustment if required).
2. Place Modifi3D PRO on the included stand.
3. Plug into the Modifi3D PRO DC socket and plug in the wall adaptor.
4. When connected to power, the LCD display will show the version number for a few seconds and then switch to the actual temperature. Preset initial temperature is 300°C.
To set the temperature press the +/- buttons until the desired temperature is selected.
After a few seconds the LCD display will show the actual temperature.
Temperature is adjusted in 1°C increments. To adjust in 10°C increments click the + or - a few times and then hold down.
If Modifi3D PRO is still for the selected standby time, it will go into standby mode and the temperature will decline to the selected standby temperature. During standby mode, it will go into sleep mode after the selected time.
When Modifi3D PRO is moved, it will wake and go into working mode automatically and the temperature will rise to the last selected temperature.
Modifi3D PRO comes with a settings mode that can be used to adjust default standby and sleep times and temperatures.
Detailed instructions will be provided in the Modifi3D PRO box.
1. To change tips unplug the DC power and allow the tips to cool.
2. Unscrew the existing tip from the end of the heater cover tube (leave the heater cover tube and locking nut in place)
3. Replace with your selected tip.
4. If you wish to rotate the tip, slightly loosen the locking nut and rotate the heater cover tube. Once at the correct angle simply tighten the locking nut.
5. Plug in the power supply.
Wipe tips before use to keep in good condition.
Do not keep Modifi3D PRO switched on for extended periods of time as this will break down the special coating on the tips.
Do not put excessive pressure on the tip during use to avoid damaging the tip or heater assembly. Let heat do the work.
Never clean tips with coarse, abrasive materials.
The temperature shown on the LCD display is the temperature of the heater element. Due to different tip sizes and shapes heat transfer to the tip edge may vary slightly and hence actual tip temperature may also vary from that shown on the display.
Press and hold the + and - buttons at the same time to open the settings mode. The LCD will then automatically cycle through 3 standby/sleep options (displaying each option for around 2 seconds). The fourth option will be the temperature unit mode. Whilst the Celsius (°C) or Fahrenheit (°F) icon is flashing press either the + or - button to toggle between the temperature units.
Check that the power cable is connected correctly to the Modifi3D PRO unit and that the DC wall adaptor is correctly plugged in and switched on.
The temperature shown on the LCD display is the temperature of the heater element. Due to different tip sizes and shapes heat transfer to the tip edge may vary slightly and hence actual tip temperature may also vary from that shown on the display.
The insert setting tip works with M3, M4, M5 and M6 threaded inserts. It is designed to fit the minor diameter of M3 and M5 but also functions with M4 and M6 due the flat surface on the tip steps.
MODIFI3D PRO
Modifi3D PRO : 3D Print Finishing Tool
TIPS
PRO Replacement/Spare Tip Packs
MODIFI3D PRO
Unit 1 Carlton Court, Grainger Road
Southend On Sea
Essex - S2 5BZ
United Kingdom
www.3dfilaprint.com
Phone: 01702 611027
MODIFI3D PRO
Unit 19
Barnwell Business Park
Cambridge - CB5 8UZ
United Kingdom
www.daemon3dprint.com
Phone: 01223 213756
MODIFI3D PRO
The Yard, Old Crown Lane
Brentwood
Essex - CM14 5TA
United Kingdom
www.ooznest.co.uk
Phone: 01277 523171
Can't find a stockist in your area? Tell your local 3D Printing Store about MODIFI3D PRO.
If you are interested in stocking MODIFI3D PRO please email modifi3dpro@steelmans3d.com.
MODIFI3D PRO
Nieuwstraat 8
9840 De Pinte
Belgium
www.3dprinthings.eu
Phone: +32 471 83 05 53
MODIFI3D PRO
Podebradska 58/186
198 00 Praha 9
Czech Republic
www.3dwiser.com
Phone: +420 778 530 800
MODIFI3D PRO
22 bis rue de la voie des bans
95100 ARGENTEUIL
France
www.imprimante3dfrance.com
Phone: (33) 1 40 85 02 28
MODIFI3D PRO
TIPS
Kleiststrasse 7
50859 Koln
Germany
www.3dmensionals.de
Phone: 02234-27660-11
MODIFI3D PRO
handicraft area
via sixth street 6 Compass
30010 Campolongo Maggiore
Venice, Italy
www.dhm-online.com
Phone: 0492701149
MODIFI3D PRO
Nieuw Walden 56
1394 PC Nederhorst den Berg
Netherlands
www.123-3d.nl
Phone: +31 (0) 294-787127
MODIFI3D PRO
Rua 21 de Agosto, 199
3510-120 Viseu
Portugal
www.ponto-z.pt
Phone: +351 232 405 565
MODIFI3D PRO
Praça dos Açores n1
Loja 2.02
2735-470 Cacém
Portugal
www.reprap.pt
Phone: +351 963 885 566
MODIFI3D PRO
TIPS
Poligono Porto Do Molle
Nave 7A
36350-Nigran (Pontevedra)
Spain
www.filament2print.com
Phone: 881 981 562
MODIFI3D PRO
except gmbh
Weststr. 15
CH-8570 Weinfelden
Switzerland
www.3d-printerstore.ch
Phone: +41 (0) 71 620 32 38
MODIFI3D PRO
TIPS
TGS Trading GmbH
Kreuzstrasse 10
CH-8635 Durnten
Switzerland
www.3dware.ch
Phone: +41 43 501 11 33
Can't find a stockist in your area? Tell your local 3D Printing Store about MODIFI3D PRO.
If you are interested in stocking MODIFI3D PRO please email modifi3dpro@steelmans3d.com.
MODIFI3D PRO
TIPS
2850 Ogletown Rd
Newark
Delaware 19713
USA
www.printedsolid.com
Phone: 302-439-0098
MODIFI3D PRO
TIPS
2833 Waterfront Ave.
Algonquin
Illinois 60102
USA
www.shop3duniverse.com
Phone: (800) 689-4344
MODIFI3D PRO
TIPS
11306 Strang Line Rd
Lenexa
Kansas 66215
USA
www.3dmakerworld.com
Phone: (913) 897-8359
MODIFI3D PRO
555 Edward Ave
Unit 12 Richmond Hill
Ontario L4C5K6
Canada
www.digitmakers.ca
Phone: +1(888) 635-7113
Can't find a stockist in your area? Tell your local 3D Printing Store about MODIFI3D PRO.
If you are interested in stocking MODIFI3D PRO please email modifi3dpro@steelmans3d.com.
Can't find a stockist in your area? Tell your local 3D Printing Store about MODIFI3D PRO.
If you are interested in stocking MODIFI3D PRO please email modifi3dpro@steelmans3d.com.
MODIFI3D PRO
TIPS
Unit 25, 566 Gardeners Rd
Alexandria
NSW 2015
Australia
www.bilby3d.com.au
Phone: 02 8197 3928 (Sydney)
MODIFI3D PRO
TIPS
Shop 2, 474 Upper Edward St
Spring Hill
QLD 4000
Australia
www.bilby3d.com.au
Phone: 07 3135 9810 (Brisbane)
MODIFI3D PRO
TIPS
Factory A5, 2 Westall Rd
Clayton
VIC 3168
Australia
www.bilby3d.com.au
Phone: 03 8080 1200 (Melbourne)
Can't find a stockist in your area? Tell your local 3D Printing Store about MODIFI3D PRO.
If you are interested in stocking MODIFI3D PRO please email modifi3dpro@steelmans3d.com.
Can't find a stockist in your area? Tell your local 3D Printing Store about MODIFI3D PRO.
If you are interested in stocking MODIFI3D PRO please email modifi3dpro@steelmans3d.com.
MODIFI3D PRO
TIPS
Block 912 Tampines Street 91
#02-121
Singapore 520912
Republic of Singapore
www.spatial-dynamics.co
Phone: (+65) 9 682 0581
MODIFI3D PRO
TIPS
7F. No.685 Zhongzheng Rd.
Taoyuan Dist.
Taoyuan City 33047
Taiwan
www.my3dp.xyz
Phone: +886-918-494-343
Can't find a stockist in your area? Tell your local 3D Printing Store about MODIFI3D PRO.
If you are interested in stocking MODIFI3D PRO please email modifi3dpro@steelmans3d.com.