MODIFI3D Original : 3D PRINT FINISHING TOOL
 
Heated 3D tool with specially coated interchangeable tips designed to FINISH, REPAIR and MODIFY 3D printed parts.
 
MODIFI3D is a heated tool with specially coated interchangeable tips designed to finish, repair and modify 3D printed parts. MODIFI3D Is designed to replace much of the sanding, scraping and snapping to finish off your 3D prints.
The pen like form of MODIFI3D makes it very comfortable to use and extremely easy to control when precision is important. MODIFI3D works with PLA, ABS and other 3D printing materials.
 
INTERCHANGEABLE TIPS-
Interchangeable tips make it easy to choose the right tool for the job...
 
KNIFE TIP - Cutting and removing sections including the removal of supports, brims, and rafts from your 3D print. Includes special coating to prevent plastic sticking to the tip.
NEEDLE TIP - Great for clearing small holes and features or for detailed layer refinements in hard to reach places. Includes special coating to prevent plastic sticking to the tip.
POINT TIP - General purpose tip for larger internal features and holes. Can even be used for making holes after printing! Includes special coating to prevent plastic sticking to the tip.
SCOOP TIP - Prefect to remove stringing and imperfections from inside holes or recesses. Can also be used to blend surfaces. Includes special coating to prevent plastic sticking to the tip.
 
MODIFI3D FEATURES-
Interchangeable tips - Needle, knife, scoop and point tips.
Special tip coating to prevent sticking.
Rapid heat up in less than 15 seconds.
Sleep mode if not used for 25 seconds.
Lightweight, compact and easy to use.
Touch switch and indicator light.
USB powered (USB 2.0 or USB 3.0).
Basic stand included.
 
MODIFI3D SPECS-
5V 8W
USB 2.0 or USB 3.0 recommended
Size: 15mm (0.6") x 117mm (4.6") excluding tips
Weight: 120g (4.3 oz)
Cable: 1.5m (59") long to USB A plug
Heats up to 300oC (572oF) in less than 15 seconds.
Maximum temperature of 420-450oC (788-842oF)