MODIFI3D
FEATURES
-
4 interchangeable tips -
-
Needle, knife, scoop and point tips.
-
Special tip coating to prevent sticking.
-
Rapid heat up in less than 15 seconds.
-
Sleep mode if not used for 25 seconds.
-
Lightweight, compact and easy to use.
-
Touch switch and indicator light.
-
USB powered (USB 2.0 or USB 3.0).
-
Basic stand included.
3D PRINTING
3D printers are fantastic things! Producing some great looking parts straight off the printer. However, if you actually own a desktop 3D printer you will know that this isn't always the case and all kinds of printing errors can creep in. Removing support material can sometimes be a pain and what if you need to modify the part after printing? You won't want to print the whole thing again if it can be avoided!... This is where the MODIFI3D ORIGINAL Finishing Tool steps in. MODIFI3D ORIGINAL offers a low cost solution to Finish, Repair and Modify 3D printed parts.
WHAT IS MODIFI3D ORIGINAL?
MODIFI3D ORIGINAL is a heated tool with specially coated interchangeable tips designed to finish, repair and modify 3D printed parts. MODIFI3D ORIGINAL is designed to replace much of the sanding, scraping and snapping to finish off your 3D prints.
The pen like form of MODIFI3D ORIGINAL makes it very comfortable to use and extremely easy to control when precision is important. MODIFI3D ORIGINAL works with PLA, ABS and other 3D printing materials.
See... 4 Interchangeable Tips.
MODIFI3D ORIGINAL SPECS
-
5V 8W
-
USB 2.0 or USB 3.0 recommended
-
Size: 15mm (0.6") x 117mm (4.6") excluding tips
-
Weight: 120g (4.3 oz)
-
Cable: 1.5m (59") long to USB A plug
-
Heats up to 300ºC (572ºF) in less than 15 seconds.
-
Maximum temperature of 420-450ºC (788-842ºF)
RAPID HEAT UP IN LESS THAN 15 SECONDS
HOW
MODIFI3D
WORKS
Finishing 3D prints should be easy and never a chore. Simply plug in the USB, touch the switch and in less than 15 seconds you are ready to go...
You will be able to remove any unwanted material or modify your print without having to redesign and print again! Place MODIFI3D ORIGINAL on its stand and in 25 seconds it will go into sleep mode (a basic stand is included but you can print your own stand/tool holder with our downloadable 3D file).
INTERCHANGEABLE TIPS
Interchangeable tips make it easy to choose the right tool for the job.
Cutting and removing sections including the removal of supports, brims, and rafts from your 3D print. Includes special coating to prevent plastic sticking to the tip.
Great for clearing small holes and features or for detailed layer refinements in hard to reach places. Includes special coating to prevent plastic sticking to the tip.
General purpose tip for larger internal features and holes. Can even be used for making holes after printing! Includes special coating to prevent plastic sticking to the tip.
Prefect to remove stringing and imperfections from inside holes or recesses. Can also be used to blend surfaces. Includes special coating to prevent plastic sticking to the tip.